Adhesion between film layers →
Reduce the force required to separate contacting surfaces
Reducing adhesion between polymer-film layers
TechnoAdd™ Anti-block is a range of anti-block masterbatches for reducing adhesion between contacting layers and making polymer films easier to separate.
During film production, winding and storage, excessive blocking can make roll unwinding, bag opening and stable operation of packaging equipment more difficult. At the same time, excessive anti-block component content can impair film transparency, gloss and surface quality.
TechnoAdd™ Anti-block masterbatches reduce blocking with regard to the polymer base, production technology and optical-property requirements. When required, the solutions are used together with slip additives for simultaneous control of blocking and the coefficient of friction.
The range includes solutions based on synthetic silicon dioxide, spherical polymer microparticles, diatomite and talc with different particle sizes. The products are used in polyethylene and polypropylene films, including blown, cast, CPP, OPP, BOPP and MDO films.
Reducing film adhesion and improving processing
Reduce the force required to separate contacting surfaces
Make it easier to separate layers during bag production and use
Reduce film adhesion during roll formation and unwinding
Help maintain the required level of layer separation
Make film separation easier as it passes through the packaging line
Make it possible to account for haze and material-appearance requirements
Solutions for polyethylene and polypropylene films
We take into account film characteristics, blocking requirements and processing conditions
We take into account the polymer type, number of layers and formulation composition
We select a solution for blown and cast extrusion, CPP, OPP, BOPP and MDO
We determine the required force for separating film layers
We take into account transparency, haze and surface-gloss requirements
We select the active component with regard to film thickness and structure
We take into account interaction with slip masterbatches and other components

We evaluate additive efficiency and its effect on film properties
Based on the test results, we select the anti-block masterbatch grade and dosage to meet the film requirements
| No. | Grade | Carrier | Active component | Features | Application | TDS | SDS |
|---|---|---|---|---|---|---|---|
| 1 | AB-01201-LL | LLDPE/mLLDPE | Spherical SiO₂, 6%; d₅₀ 3.0 µm | High transparency, minimal effect on haze | Blown / Cast / Lamination | TDS | SDS |
| 2 | AB-01203-LL | LLDPE/mLLDPE | Spherical SiO₂, 6%; d₅₀ 6.0 µm | Enhanced anti-block effect while maintaining transparency | Blown / Cast | TDS | SDS |
| 3 | AB-01208-PP | PP-H | Spherical SiO₂, 6%; d₅₀ 3.0 µm | High transparency, stable anti-blocking | CPP / BOPP / Lamination | TDS | SDS |
| 4 | AB-01209-PP | PP-H | Spherical polymer microparticles; d₅₀ 2.0 µm | Maximum transparency, minimal adsorption of slip additives | CPP / BOPP / Lamination | TDS | SDS |
| 5 | AB-01210-PP | PP-R | Spherical polymer microparticles; d₅₀ 2.0 µm | Maximum transparency, minimal adsorption of slip additives | CPP / BOPP / Lamination | TDS | SDS |
| 6 | AB-01240-LD | LDPE | Spherical SiO₂, 6%; d₅₀ 3.0 µm | High transparency, stable processing | Blown / Cast / MDO-PE / Lamination | TDS | SDS |
| 7 | AB-01241-LD | LDPE | Talc, 20%; d₅₀ 5.0 µm | Economical solution for films without high optical requirements | Blown / Cast | TDS | SDS |
| 8 | AB-01202-LL | LLDPE/mLLDPE | Diatomite, 15%; d₅₀ 10.0 µm | High efficiency for films with standard transparency | Blown / Cast | TDS | SDS |
| 9 | AB-01204-LL | LLDPE/mLLDPE | Diatomite, 15%; d₅₀ 16.0 µm | Enhanced anti-blocking for opaque and technical films | Blown / Cast | TDS | SDS |
| 10 | AB-01205-LL | LLDPE/mLLDPE | Talc, 20%; d₅₀ 5.2 µm | Universal anti-blocking for standard films | Blown / Cast | TDS | SDS |
| 11 | AB-01207-LL | LLDPE/mLLDPE | Talc, 20%; d₅₀ 7.4 µm | Enhanced anti-blocking for opaque films | Blown / Cast | TDS | SDS |
The recommended grade is selected with regard to the polymer base, film thickness, anti-blocking requirements and optical properties. Detailed characteristics are provided in the product technical specification.
We will determine the grade and dosage with regard to film requirements and production conditions