Insufficient product opacity →
Help achieve the required opacity with regard to material thickness
Concentrates for colouring polymer products with specified whiteness and opacity
TechnoTone™ White is a range of titanium-dioxide-based white masterbatches for colouring polymer products with different requirements for whiteness, opacity and processing conditions.
The range includes economical, standard and high-performance grades — from solutions for translucent colouring to masterbatches with high opacity, enhanced heat resistance or for products with special surface-quality requirements.
The polymer carrier, titanium dioxide type and content, white shade and dosage are selected with regard to product application, thickness and processing technology.
The masterbatches are used in films, flexible and rigid packaging, pipes, profiles, injection- and blow-moulded products, polypropylene tapes, woven sacks and big bags.
They enable selection of the required white shade, opacity and processing conditions
Help achieve the required opacity with regard to material thickness
Enable selection of milky, neutral or cool white shades
Promote uniform distribution of titanium dioxide in the polymer base
Help provide uniform colouring and product surface quality
Enable masterbatch selection with regard to production temperature conditions
Help select a solution with regard to opacity, dosage and colouring cost
Economical, standard and high-performance solutions for different processing technologies
We consider the polymer base, colouring requirements, processing conditions and product application
We select the carrier with regard to polymer type and formulation
We define the required whiteness level and finished-product shade
We consider the required opacity at the specified product thickness
We select a solution with regard to the production method and temperature conditions
We consider appearance requirements and shade retention under light exposure
We determine the addition level with regard to opacity and colouring cost

We evaluate whiteness, opacity, colour uniformity and colour stability
Based on the test results, we select the white masterbatch grade and dosage with regard to colour, opacity and processing requirements.
| No. | Grade | TiO₂, % | Carrier | Grade features | Key benefits | Primary application | TDS | SDS |
|---|---|---|---|---|---|---|---|---|
| 1 | WM-02921-LL | 40 | LLDPE | Economical | Good dispersion, uniform coloration and easy dosing | Blown film, bags, household and packaging film | TDS | SDS |
| 2 | WM-02922-LL | 60 | LLDPE | General-purpose, highly dispersible | Balanced opacity, coloration quality and cost; low odor during processing | Blown film made from LDPE, LLDPE and HDPE | TDS | SDS |
| 3 | WM-02911-LD | 70 | LDPE | High-concentration | High opacity, fine dispersion, minimal specks and agglomerates | Thin PE packaging film | TDS | SDS |
| 4 | WM-02912-LD | 60 | LDPE | Heat-resistant, low-volatility | Low odor during processing; minimal impact on adhesion in laminated structures | Extrusion lamination and coating | TDS | SDS |
| 5 | WM-02913-LD | 70 | LDPE | High-concentration, heat-resistant | High opacity with minimal die build-up | Thin white extrusion coatings | TDS | SDS |
| 6 | WM-02923-LL | 70 | LLDPE | Highly dispersible, filterable | Uniform coloration, good melt filterability and minimal specks | Flat-die extrusion and cast PE film | TDS | SDS |
| 7 | WM-02940-PP | 70 | PP-R | Heat-resistant, highly dispersible | Smooth surface with minimal die build-up | Non-oriented CPP film | TDS | SDS |
| 8 | WM-02931-PP | 60 | PP-H | Highly dispersible | Stable orientation, fine dispersion, minimal specks and agglomerates | Oriented BOPP film | TDS | SDS |
| 9 | WM-02932-PP | 70 | PP-H | High-concentration | High opacity with minimal agglomerates and specks | Thin white layer in BOPP film | TDS | SDS |
| 10 | WM-02933-PP | 70 | PP-H | Designed for stable drawing | Minimal impact on PP tape strength and breakage | PP tapes, woven sacks and FIBC | TDS | SDS |
| 11 | WM-02934-PP | 60 | PP-H | Functional, with fluorine-free PPA | Reduced extruder pressure and die build-up; stable high-speed drawing | High-speed production of PP tapes, woven sacks and FIBC | TDS | SDS |
| 12 | WM-02901-HD | 50 | HDPE | Economical | Uniform distribution, stable color and consistent processing | Household and technical injection-molded PE products | TDS | SDS |
| 13 | WM-02935-PP | 70 | PP-H | High-concentration | High opacity with stable, uniform color | Household and technical injection-molded PP products | TDS | SDS |
| 14 | WM-02936-PP | 60 | PP-H | High-flow, nucleated | Faster crystallization, dimensional stability and shorter cycle time | Thin-wall containers, caps and IML packaging | TDS | SDS |
| 15 | WM-02937-PP | 70 | PP-H | High-flow, high-concentration | High opacity at low dosage with uniform color | High-whiteness thin-wall injection molding and IML packaging | TDS | SDS |
| 16 | WM-02938-PP | 60 | PP-H | With release additive | Easier demolding, reduced part sticking to the mold and a stable cycle | Thin-wall containers, caps and packaging; IML after adhesion verification | TDS | SDS |
| 17 | WM-02902-HD | 70 | HDPE | Highly dispersible, high-concentration | High opacity, stable color and high-quality surface | Non-pressure PE pipes, profiles and the outer layer of multilayer pipes | TDS | SDS |
| 18 | WM-02941-PP | 70 | PP-R | Heat-resistant, high-concentration | Color stability and high-quality surface during processing | PP pipes and profiles for indoor applications | TDS | SDS |
| 19 | WM-02903-HD | 60 | HDPE | UV- and weather-resistant | Retention of color and appearance during outdoor service | Outdoor PE pipes, profiles and construction products | TDS | SDS |
| 20 | WM-02942-PP | 60 | PP-R | UV- and weather-resistant | Color stability during prolonged outdoor service | Outdoor PP sheets, profiles and thermoformed products | TDS | SDS |
| 21 | WM-02939-PP | 70 | PP-H | Highly dispersible, high-concentration | Uniform color distribution, stable drawdown and minimal specks | PP cups, trays and thermoformed packaging | TDS | SDS |
| 22 | WM-02950-PET | 60 | PET | Heat-resistant, PET-compatible | Low moisture, minimal outgassing and no polyolefin carrier | APET sheets, trays and thermoformed packaging | TDS | SDS |
| 23 | WM-02951-PET | 70 | PET | High-concentration, heat-resistant | High opacity, low moisture and minimal outgassing | High-opacity APET sheets and thermoformed packaging | TDS | SDS |
| 24 | WM-02960-SAN | 60 | SAN | Heat-resistant, minimal yellowing | High whiteness and color stability during high-temperature processing | Injection-molded and extruded ABS and SAN products | TDS | SDS |
For selected grades, formulations are available that meet the requirements for materials intended for food contact. Suitability for use depends on the specific grade, recommended dosage and operating conditions. Detailed technical characteristics and confirmed compliance information are provided in the TDS.
We will select the grade and dosage with regard to whiteness, opacity and processing requirements