Rough product surface →
Help reduce surface defects, including the sharkskin effect
Stable extrusion and improved surface quality of polymer products
TechnoAdd™ PPA is a range of processing-aid masterbatches designed to improve polymer processing during extrusion and enhance the surface quality of finished products.
During the production of films, pipes, sheets and cable sheathing, surface defects, die build-up, pressure fluctuations and process instability may occur. These issues are especially noticeable at high line output and when processing high-viscosity polymers.
TechnoAdd™ PPA masterbatches reduce interaction between the polymer melt and metal surfaces of extrusion tooling. This helps reduce defects such as sharkskin, minimise die build-up and improve product surface quality.
The range includes solutions for extrusion processing of polyethylene, polypropylene and other polymers. The grade and dosage are selected with regard to the polymer base, equipment design, line output and processing conditions.
Reduction of processing defects and stabilisation of extrusion
Help reduce surface defects, including the sharkskin effect
Help reduce polymer build-up at the extrusion-die outlet
Help stabilise material flow through forming tooling
Help reduce resistance to melt flow during processing
Help expand the extrusion operating window while maintaining product quality
Help increase intervals between cleaning of forming tooling
Processing aids for extrusion of films, pipes, polypropylene tapes and other products
We take into account the formulation, extrusion parameters and product-surface requirements

Assessment of processing parameters and finished-product characteristics
Based on test results, we select the PPA masterbatch grade and dosage for the requirements of the specific production process.
| No. | Grade | Carrier | Active component | Features | Application | TDS | SDS |
|---|---|---|---|---|---|---|---|
| 1 | PPA-02101-LD | LDPE | Fluoropolymer processing system | Reduced melt fracture, melt pressure and die build-up | Blown and flat-die extrusion of PE films | TDS | SDS |
| 2 | PPA-02104-LL | LLDPE / mLLDPE | Functionalized copolysiloxane system without fluoropolymers | Improved melt flow and reduced die build-up | Blown, flat-die and multilayer extrusion of PE films | TDS | SDS |
| 3 | PPA-02106-LL | LLDPE / mLLDPE | Organic polymer system without PFAS or silicones | Reduced surface defects with printing, lamination and sealing requirements taken into account | PE-film extrusion for flexible packaging, printing and lamination | TDS | SDS |
| 4 | PPA-02102-HD | HDPE | Fluoropolymer processing system | Stabilized extrusion of high-viscosity polyethylene and improved surface quality | Extrusion of HDPE films, pipes, profiles and cable jackets | TDS | SDS |
| 5 | PPA-02103-PP | PP-H | Fluoropolymer processing system | Reduced surface defects and deposits on extrusion tooling | Extrusion of PP raffia, fibers, sheets and CPP films | TDS | SDS |
| 6 | PPA-02105-PP | PP-R | Functionalized copolysiloxane system without fluoropolymers | Improved melt flow and surface quality of PP-R products | Extrusion of PP-R pipes, sheets and profiles | TDS | SDS |
| 7 | PPA-02107-PP | PP-H | Organic polymer system without PFAS or silicones | Stabilized extrusion with subsequent surface-processing requirements taken into account | Extrusion of CPP films, sheets and PP raffia | TDS | SDS |
| 8 | PPA-02108-PS | HIPS | Functionalized copolysiloxane system without fluoropolymers | Improved processing and surface quality of high-impact polystyrene | Extrusion of HIPS sheets for thermoforming and refrigeration appliances | TDS | SDS |
| 9 | PPA-02109-AB | ABS | Functionalized copolysiloxane system without fluoropolymers | Improved melt flow and surface quality of ABS sheets | Extrusion of ABS sheets for thermoforming, household appliances and technical products | TDS | SDS |
| 10 | PPA-02110-PT | PET | High-temperature organic system without PFAS or silicones | Stabilized polyester extrusion with transparency and surface-quality requirements taken into account | Extrusion of PET and rPET films and sheets for packaging and thermoforming | TDS | SDS |
The recommended grade is selected with regard to the polymer, extrusion-tooling design and production parameters. Detailed characteristics are provided in the product technical specification.
We will select a PPA masterbatch with regard to the polymer, equipment and production task.