Brittle failure of the product →
Increase material resistance to mechanical impacts
Improving the resistance of polymer products to impact loads
TechnoAdd™ Impact Modifier is a range of impact modifiers for improving the resistance of polymer products to impact loads.
Insufficient impact strength can lead to cracks, chipping and failure of parts during production, transportation and service. These problems are especially pronounced at low temperatures, at high filler concentrations and in products with complex designs.
TechnoAdd™ Impact Modifier products help increase the impact strength of the material with regard to the polymer base, service temperature and finished-product requirements. When selecting the formulation, the required balance of impact strength, stiffness and melt flow is taken into account.
The products are used in the manufacture of packaging, pipes, automotive parts, household-appliance components and other polymer products.
Improving the resistance of polymer products to impact and failure
Increase material resistance to mechanical impacts
Reduce the risk of part damage under impact loads
Help preserve material impact strength under cooling conditions
Increase the resistance of parts to impacts during handling and storage
Help compensate for the effect of mineral fillers on product brittleness
Make it possible to account for the required balance of impact strength, stiffness and flow
Solutions for improving the impact strength of polymer materials
We take into account the polymer base, product design and service conditions
We consider the compatibility of the modifier with PP, PE, ABS and other polymers used
We assess the intensity of impacts during production, transportation and service
We define impact-strength requirements at room and reduced temperatures
We account for the acceptable effect of the modifier on elastic modulus and shape retention
We assess the effect of formulation and dosage on melt flow and forming
We take into account wall thickness, part geometry and stress concentrators

We evaluate the effect of the modifier on the impact strength, stiffness and processability of the material
Based on the test results, we select the impact modifier grade and dosage to meet the requirements for the material and the finished product.
| No. | Grade | Carrier | Active component | Features | Application | TDS | SDS |
|---|---|---|---|---|---|---|---|
| 1 | IM-04101-HD | HDPE | Polyolefin elastomer and metallocene linear low-density polyethylene, POE + mLLDPE | Improved impact strength and resistance to cracking | Blow-molded containers, technical tanks, injection-molded products | TDS | SDS |
| 2 | IM-04110-HD | HDPE | Maleic-anhydride-grafted polyolefin elastomer, POE-g-MAH | Improved impact strength of filled systems and better interfacial interaction | Filled HDPE compounds, technical containers, injection-molded products | TDS | SDS |
| 3 | IM-04102-PP | PP | Polyolefin elastomer and ethylene-propylene rubber, POE + EPR | Balance of impact strength, stiffness and flow | Injection-molded products, industrial containers, household appliances | TDS | SDS |
| 4 | IM-04103-PP | PP | Ethylene-propylene rubber, EPR | Improved impact strength of mineral-filled polypropylene compounds | Talc- and CaCO₃-filled PP compounds, housing parts, automotive components | TDS | SDS |
| 5 | IM-04104-PS | PS | Styrene-isoprene-styrene block copolymer, SIS | Reduced brittleness of polystyrene | Injection-molded packaging, household products, technical parts | TDS | SDS |
| 6 | IM-04105-PS | PS | Methyl methacrylate-butadiene-styrene impact modifier, MBS | Improved impact strength with consideration for optical-property requirements | Transparent packaging, sheets, display products | TDS | SDS |
| 7 | IM-04106-AB | ABS | Methyl methacrylate-butadiene-styrene impact modifier, MBS | Improved impact strength while maintaining surface quality | Household-appliance housings, electrical equipment, technical parts | TDS | SDS |
| 8 | IM-04107-AB | ABS | Acrylic impact modifier, AIM | Improved impact strength where enhanced weather resistance is required | Outdoor housings, electrical products, automotive components | TDS | SDS |
| 9 | IM-04108-PA | PA | Maleic-anhydride-grafted polyolefin elastomer, POE-g-MAH | Improved impact strength through reactive compatibility with polyamide | Mechanical-engineering parts, fasteners, electrical products | TDS | SDS |
| 10 | IM-04109-PA | PA | Maleic-anhydride-grafted ethylene-propylene-diene rubber, EPDM-g-MAH | Improved impact strength of reinforced polyamide compounds | Glass-fiber-reinforced PA compounds, structural parts, industrial equipment | TDS | SDS |
The recommended grade is selected with regard to the polymer base, service temperature, the nature of impact loads and material-stiffness requirements. Detailed characteristics are provided in the product technical specification.
We will select a grade and dosage with regard to the polymer, product design and service conditions