Higher impact-strength requirements →
Increase resistance of parts to impact loads during use
ABS compounds with specified mechanical, thermal and processing characteristics
Techabryl™ is a range of ABS compounds with specified mechanical, thermal and processing characteristics.
Standard ABS grades provide good impact strength and surface quality, but they do not always deliver the properties required for a specific product. Higher heat-resistance and melt-flow requirements may require modification of the material composition. Where appearance requirements are high, particular attention must be paid to colour uniformity and surface quality.
Techabryl™ compounds are designed to achieve the required impact strength, heat resistance, flowability and surface quality. Coloured compounds provide uniform colour, shade stability and consistent finished-product surface quality. The composition is selected with regard to processing technology and service conditions.
The range includes standard, impact-modified, heat-resistant, high-flow and reinforced compounds, as well as materials with enhanced UV resistance, antistatic properties and reduced flammability. Shade, matt or glossy finish and scratch resistance can also be tailored when required.
The products are used in household-appliance parts, automotive components, electrical products, industrial-equipment housings and consumer goods.
They provide the required material properties, colour stability and surface quality of finished products
Increase resistance of parts to impact loads during use
Increase resistance of parts to elevated temperatures
Improve mould filling in thin-walled and complex products
Help provide uniform colour and stable shade in finished products
Provide the required gloss, matt finish and scratch resistance
Enable UV-resistant, antistatic and flame-retardant materials
Materials with different characteristics for manufacturing polymer products
We consider product requirements, material properties, processing and service conditions
We consider the application, part geometry and service loads
We select the ABS base, modifying and reinforcing components
We define the required impact strength and material stiffness
We consider melt flow, processing method and equipment characteristics
We assess heat resistance, UV resistance, antistatic properties and flammability
We consider colour, colour uniformity, gloss, matt finish and scratch resistance

We evaluate material properties with regard to processing conditions and finished-product requirements
Based on the test results, we select an ABS compound grade with regard to product requirements, processing and service conditions.
| No. | ABS type | Grade | MFR, g/10 min | Vicat, °C | Features | Application | TDS | SDS |
|---|---|---|---|---|---|---|---|---|
| 1 | General-purpose | GP-09101 | 22 ± 2 | 100 ± 3 | Balanced strength, stiffness and processability | Household products, housing parts, technical components | TDS | SDS |
| 2 | General-purpose | GP-09103 | 15 ± 2 | 102 ± 3 | Increased stiffness, dimensional stability | Housing components, furniture fittings, technical parts | TDS | SDS |
| 3 | Impact-resistant | HI-09201 | 8 ± 1 | 96 ± 3 | Increased impact resistance | Protective housings, household products, technical parts | TDS | SDS |
| 4 | Impact-resistant | HI-09203 | 15 ± 2 | 98 ± 3 | Impact resistance, high surface quality | Household-appliance housings, front panels | TDS | SDS |
| 5 | Low-temperature resistant | HI-09204 | 10 ± 2 | 95 ± 3 | Impact resistance at low temperatures | Refrigeration equipment, transport products, industrial equipment | TDS | SDS |
| 6 | High-flow | HF-09301 | 40 ± 4 | 96 ± 3 | High flow, improved filling of thin-walled molds | Electronic housings, lids, small injection-molded parts | TDS | SDS |
| 7 | High-flow | HF-09303 | 30 ± 3 | 97 ± 3 | High flow, increased impact resistance | Large housings, complex-shaped parts | TDS | SDS |
| 8 | Heat-resistant | HH-09401 | 15 ± 2 | 110 ± 3 | Increased heat resistance, dimensional stability | Household-appliance housings, electrical-equipment parts | TDS | SDS |
| 9 | Heat-resistant | HH-09402 | 10 ± 2 | 115 ± 3 | Resistance to prolonged heat exposure | Equipment components, technical parts | TDS | SDS |
| 10 | Heat-resistant | HH-09403 | 12 ± 2 | 108 ± 3 | Increased heat resistance and impact resistance | Automotive interior components, load-bearing housing parts | TDS | SDS |
| 11 | Flame-retardant | FR-09501 | 18 ± 2 | 95 ± 3 | Reduced flammability | Electrical housings, instrument panels | TDS | SDS |
| 12 | Flame-retardant | FR-09502 | 28 ± 3 | 94 ± 3 | Reduced flammability, increased flow | Thin-wall electrical housings | TDS | SDS |
| 13 | Flame-retardant | FR-09503 | 12 ± 2 | 95 ± 3 | Reduced flammability, increased impact resistance | Protective housings, electrical equipment | TDS | SDS |
| 14 | Halogen-free | FR-09504 | 12 ± 2 | 95 ± 3 | Reduced flammability, halogen-free formulation | Electrical products, electronic-equipment housings | TDS | SDS |
| 15 | Flame-retardant | FR-09505 | 8 ± 2 | 102 ± 3 | Short glass fiber SGF, 20%; reduced flammability, increased stiffness | Electrical components, load-bearing housings | TDS | SDS |
| 16 | Matte | MAT-09601 | 18 ± 2 | 98 ± 3 | Uniform matte surface | Decorative housings, front panels | TDS | SDS |
| 17 | Matte | MAT-09602 | 14 ± 2 | 97 ± 3 | Matte surface, increased impact resistance | Automotive interiors, protective housings | TDS | SDS |
| 18 | Matte | MAT-09603 | 12 ± 2 | 108 ± 3 | Matte surface, increased heat resistance | Instrument panels, household-appliance components | TDS | SDS |
| 19 | High-gloss | HG-09701 | 20 ± 2 | 98 ± 3 | High surface gloss | Front panels, decorative parts | TDS | SDS |
| 20 | High-gloss | HG-09702 | 16 ± 2 | 97 ± 3 | High gloss, increased impact resistance | Household-appliance housings, automotive interiors | TDS | SDS |
| 21 | High-gloss | HG-09703 | 32 ± 3 | 96 ± 3 | High gloss, increased flow | Decorative housings, electronic devices | TDS | SDS |
| 22 | Glass-fiber reinforced | GF-09801 | 14 ± 2 | 101 ± 3 | Short glass fiber SGF, 10%; increased stiffness | Technical parts, fastening elements | TDS | SDS |
| 23 | Glass-fiber reinforced | GF-09802 | 10 ± 2 | 103 ± 3 | Short glass fiber SGF, 20%; increased strength and stiffness | Structural housings, industrial equipment | TDS | SDS |
| 24 | Glass-fiber reinforced | GF-09803 | 7 ± 1 | 104 ± 3 | Short glass fiber SGF, 30%; high stiffness, reduced shrinkage | Load-bearing technical parts, equipment components | TDS | SDS |
| 25 | Glass-fiber reinforced | GF-09804 | 8 ± 2 | 101 ± 3 | Short glass fiber SGF, 20%; increased impact resistance | Protective housings, structural parts | TDS | SDS |
| 26 | Glass-fiber reinforced | GF-09805 | 8 ± 2 | 110 ± 3 | Short glass fiber SGF, 20%; increased heat resistance | Household-appliance parts, electrical-equipment components | TDS | SDS |
| 27 | Extrusion grade | EX-09901 | 4 ± 1 | 100 ± 3 | Stable extrusion, suitability for thermoforming | Extruded sheets, thermoformed products | TDS | SDS |
| 28 | Extrusion grade | EX-09902 | 5 ± 1 | 98 ± 3 | Stable extrusion, increased impact resistance | Technical sheets, protective panels, housing components | TDS | SDS |
| 29 | Extrusion grade | EX-09903 | 7 ± 1 | 99 ± 3 | Stable extrusion, improved surface quality | Decorative sheets, furniture elements, cladding panels | TDS | SDS |
| 30 | Light-stabilized | UV-091101 | 18 ± 2 | 99 ± 3 | Increased resistance to solar radiation | Outdoor technical housings, equipment components | TDS | SDS |
| 31 | Light-stabilized | UV-091102 | 14 ± 2 | 98 ± 3 | Light resistance, increased impact resistance | Outdoor housings, transport products | TDS | SDS |
| 32 | Antistatic | AS-091201 | 18 ± 2 | 98 ± 3 | Reduced static-charge accumulation | Equipment housings, industrial containers, technical products | TDS | SDS |
| 33 | Antistatic | AS-091202 | 14 ± 2 | 97 ± 3 | Antistatic properties, increased impact resistance | Protective housings, technical containers | TDS | SDS |
| 34 | Light-transmitting | LD-091401 | 18 ± 2 | 97 ± 3 | Controlled light transmission for concealed LED indication | Air-conditioner front panels, household appliances with temperature indicators | TDS | SDS |
| 35 | Light-transmitting | LD-091402 | 22 ± 2 | 97 ± 3 | Controlled light transmission, glossy surface, light diffusion | Decorative air-conditioner panels, household appliances with concealed LED indication | TDS | SDS |
The ABS compound grade is selected with regard to product application, processing technology, mechanical and thermal properties, colour and surface-quality requirements. Detailed characteristics are provided in the product technical data sheet.
We will select a material with regard to product requirements, processing technology and service conditions